Universal pre-crimped harness dedicated for Ecumaster EMU PRO-8.
Wires are labeled.
The cables have different colours
length: 2,5m
plugs are not included
Spec:
Injectors - White - 0,5mm^2 - 1x INJ1
Injectors - White - 0,5mm^2 - 1x INJ2
Injectors - White - 0,5mm^2 - 1x INJ3
Injectors - White - 0,5mm^2 - 1x INJ4
Injectors - White - 0,5mm^2 - 1x INJ5
Injectors - White - 0,5mm^2 - 1x INJ6
Injectors - White - 0,5mm^2 - 1x INJ7
Injectors - White - 0,5mm^2 - 1x INJ8
Ignition - Blue - 0,75mm^2 - 1x IGN1
Ignition - Blue - 0,75mm^2 - 1x IGN2
Ignition - Blue - 0,75mm^2 - 1x IGN3
Ignition - Blue - 0,75mm^2 - 1x IGN4
Ignition - Blue - 0,75mm^2 - 1x IGN5
Ignition - Blue - 0,75mm^2 - 1x IGN6
Ignition - Blue - 0,75mm^2 - 1x IGN7
Ignition - Blue - 0,75mm^2 - 1x IGN8
AUX - Yellow - 0,5mm^2 - 1x AUX1
AUX - Yellow - 0,5mm^2 - 1x AUX2
AUX - Yellow - 0,5mm^2 - 1x AUX3
AUX - Yellow - 0,5mm^2 - 1x AUX4
AUX - Yellow - 0,5mm^2 - 1x AUX5
AUX - Yellow - 0,5mm^2 - 1x AUX6
AUX - Yellow - 0,5mm^2 - 1x AUX7
AUX - Yellow - 0,5mm^2 - 1x AUX8
AUX - Yellow - 0,5mm^2 - 1x AUX9
AUX - Yellow - 0,5mm^2 - 1x AUX10
AUX - Yellow - 0,5mm^2 - 1x AUX11
AUX - Yellow - 0,5mm^2 - 1x AUX12
H-Bridge - Gray - 0,75mm^2 - 1x HB1A
H-Bridge - Gray - 0,75mm^2 - 1x HB2A
H-Bridge - Gray - 0,75mm^2 - 1x HB3A
H-Bridge - Gray - 0,75mm^2 - 1x HB1B
H-Bridge -Gray - 0,75mm^2 - 1x HB2B
H-Bridge - Gray - 0,75mm^2 - 1x HB3B
Analogs - Purple - 0,35mm^2 - 1x AIN1
Analogs - Purple - 0,35mm^2 - 1x AIN2
Analogs - Purple - 0,35mm^2 - 1x AIN3
Analogs - Purple - 0,35mm^2 - 1x AIN4
Analogs - Purple - 0,35mm^2 - 1x AIN5
Analogs -Purple - 0,35mm^2 - 1x AIN6
Analogs -Purple - 0,35mm^2 - 1x AIN7
Analogs - Purple - 0,35mm^2 - 1x AIN8
Analogs - Purple - 0,35mm^2 - 1x AIN9
Analogs - Purple - 0,35mm^2 - 1x AIN10
Analogs - Purple - 0,35mm^2 - 1x AIN11
Analogs - Purple - 0,35mm^2 - 1x AIN12
Analogs - Purple - 0,35mm^2 - 1x AIN13
Analogs - Purple - 0,35mm^2 - 1x AIN14
Analogs - Purple - 0,35mm^2 - 1x AIN15
Analogs - Purple - 0,35mm^2 - 1x AIN16
Precision analogs - Purple - 0,35mm^2 - 1x AIP1
Precision analogs - Purple - 0,35mm^2 - 1x AIP2
Precision analogs - Purple - 0,35mm^2 - 1x AIP3
Precision analogs - Purple - 0,35mm^2 - 1x AIP4
PGND - Black - 0,75mm^2 - 1x PGND - C30
PGND - Black - 0,75mm^2 - 1x PGND - A11
PGND - Black - 0,75mm^2 - 1x PGND - A19
PGND - Black - 1mm^2 - 1x PGND - A17
PGND - Black - 1mm^2 - 1x PGND - B19
AGND, DGND - Brown - 0,35mm^2 - 3x GND
Digital -Green - 0,35mm^2 - 1x DIG1
Digital - Green - 0,35mm^2 - 1x DIG2
Digital -Green - 0,35mm^2 - 1x DIG3
Digital - ZGreen - 0,35mm^2 - 1x DIG4
Digital - Green - 0,35mm^2 - 1x DIG5
Digital - Green - 0,35mm^2 - 1x DIG6
Digital -Green - 0,35mm^2 - 1x DIG7
Digital - Green - 0,35mm^2 - 1x DIG8
WBO - Black-Yellow - 0,35mm^2 - 1x WB1IP
WBO - Black-Yellow - 0,35mm^2 - 1x WB1VS
WBO - Black-Yellow - 0,35mm^2 - 1x WB1RC
WBO - Black-Yellow - 0,35mm^2 - 1x WB1VG
WBO - Black-Yellow - 0,35mm^2 - 1x WB1HT
WBO - Black-Yellow - 0,35mm^2 - 1x WB2IP
WBO - Black-Yellow - 0,35mm^2 - 1x WB2VS
WBO - Black-Yellow - 0,35mm^2 - 1x WB2RC
WBO - Black-Yellow - 0,35mm^2 - 1x WB2VG
WBO - Black-Yellow - 0,35mm^2 - 1x WB2HT
+5V - Orange - 0,35mm^2 - 2x +5VA
+5V - Orange - 0,35mm^2 - 2x +5VB
+12V - Red - 1mm^2 - 2x +12V
+12V Switched -Red - 0,35mm^2 - 1x +12SW
CAN - Pink - 0,35mm^2 - 1x CAN1L
CAN - Pink - 0,35mm^2 - 1x CAN1H
CAN -Pink - 0,35mm^2 - 1x CAN2L
CAN -Pink - 0,35mm^2 - 1x CAN2H
LIN - Pink - 0,35mm^2 - 1x LIN
-6pcs AUX outputs (6A)
-6pc Ignition outputs - for passive or active coils, configurable (15A)
-4pc stepper motor outputs - bipolar / unipolar (6.5A)
-1 CAN-BUS channel (CAN 2.0B)
-1 serial output
-2 EGT inputs
-2 pcs knock sensor inputs < br /> -1 built-in broadband lambda controller for Bosch LSU 4.2 or 4.9 sensor.
-1 Flexfuel input
-Built-in map sensor 400kPa
-Built-in bar sensor
-4pcs digital trigger inputs for VR / HALL sensors - (1st crank position sensor, 2 cam position sensors, 1 speed sensor)
-Support for VANOS, VVTi and other variable cam systems (controls up to 2 individual cams)
-Advanced setting for "paddle shift" and "gear cut"
-3 dedicated analog inputs for TPS , CLT, IAT
-Built-in "Drive By Wire" support, for dampers.
-6 analog inputs (0-5V) for eg oil pressure, fuel pressure, oil temp etc.
-3 specific switches for e.g. launch control, flat shift etc.
-Waterproof and dustproof IP67 enclosure
-Supports 1-6 cylinders sequentially. Can control up to 12 cylinders.
-Max 16000rpm
-Injection time resolution is 16us
-The ignition resolution is 0.5 °
-Nail detection 1-20 kHz
-Speed Density, Alpha- The N-algorithm
-VE table is 16x20 squares, the resolution is 0.1% VE
-The ignition table is 16x20 squares, the resolution is 0.5 °
-AFR table is 16x20 squares, the resolution is 0.1 AFR
-Very advanced fuel algorithm based on actual volumetric efficiency
-Fully calibrated ignition coil / ignition coil time
-Fully calibrated IAT, CLT & lt; br / & gt; -PID idle control strategy
-Cheap pressure control
-Nitro control
-Aux outputs for fuel pumps, fans etc.
-Fully adjustable settings for start control, shift light, flat shift (shift) and much more.
-Advanced logging of over 100 parameters with a resolution of 25Hz
-Safety functions to ensure motor functionality.
-USB communication directly to the computer
-User-friendly software with free firmware upgrade